http://www.asselborn-matthias.de/firstpic.JPG
this is my H2600 for my own S2600 - it is not finish !!!
greetings !
Matthias
Printable View
http://www.asselborn-matthias.de/firstpic.JPG
this is my H2600 for my own S2600 - it is not finish !!!
greetings !
Matthias
Matthias, where is your location ??:)
Eckhard
i wrote my location in a other post
iam from Germany
oh i forget
this is the cabinet !
http://www.asselborn-matthias.de/cabinet.JPG
greetings
Nice endeavor dude! :yes:
You must be some kind of maniac Matthias....:D Why not the S/3100 while you where at it ? Great job though... how the hell you managed the horn I'll never figure out. Are you planning to damp the horn?
More pics as you progress, please.
Bernard
ok if you intereste ok ! i will post more pics !
iam 20 (in two days 21) years old
i am a great jbl fan ive 4 lx 55
soon the s2600*g*
i made a cabinet maker ( Schreiner ) education
this year i go to school
then i will studie computer sience
first i made a dxf of the horn !
in vellum cad
than i made the templates
with mdf and putty (spachtelmasse)
then i sharp the Horn !
last week i bought one ME120HS
in the moment i order the crossover parts !
tomorrow i wil clean up my work room
and then the freetime is over :-)
i ve had two week s holidays next week the school starts again
if you want i can post more pics of the construction of the horn !
http://www.asselborn-matthias.de/horn1.JPG
http://www.asselborn-matthias.de/horn2.JPG
http://www.asselborn-matthias.de/horn3.JPG
no i need several distances ( the red lines ! ) because i havent a S2600 at home ...
http://www.asselborn-matthias.de/s2600.jpg
greetings
sorry but ?
what did you mean ??? with :
Are you planning to damp the horn?
damp ?
greetings !
http://www.asselborn-matthias.de/1.jpg
http://www.asselborn-matthias.de/b1.JPG
http://www.asselborn-matthias.de/b3.JPG
http://www.asselborn-matthias.de/bild1.JPG
why the S2600 and not the S3100
because there is no space in my room at my parents house
the S2600 exactly fit in an edge ! :)
the S3100 is higher than the S2600 and doesnt fit in the edge !
http://www.asselborn-matthias.de/s2600i.JPG
In the first picture of the horn I though it was in fiberglass, thus the question, as I own the S/3100 and have had some thoughts of dampening/deadening the horn with lead or the like. I see though that you have made the horn from MDF and then will not need to address that question. Great work Matthias!!
21 yrs old, eh ? be intreresting to see what youi are doing 20 years from now :D
Bernard
Hello Bernhard !
ive a question !
ive Post a Pic of the S2600 with red lines !
this distance i need ... because ive no S2600 to messure...self
sorry for my poor english :-(
but the Midplate ! of the S2600
are there Holes in it ??? or is the Plate without any Holes !
to cut Low and High driver ?
which distance is from the top of the 2600 to this midplate ??
greetings
Matthias Asselborn
Wow that looks real nice!
Rob:)
Hi MatthiasQuote:
Originally Posted by MatthiasA
I own the 3100 not the 2600, so I don't think I can make any meaningfull measurments for you. Also, I do not understand your question. Do you mean inside of the cabinet ? If so, yes there is a 'plate' or we could say, a 'baffle' (?) that braces the cabinet at that point. I would need to take my bass driver out to tell you the exact location but as I recall it is just below the bottom edje of the horn. I don't think that this distance would be critical as it is not to separate the two drivers but rather, from the looks, just fo added bracing. The baffle, as I recall, is open all the way around except for perhaps a 2" border. For your information, there is also a MDF brace about 2" wide that runs up the both sides of the cabinet at about the mid-point. I can't tell from just sticking my hand inside the port how far they go up but - all the way to the top - or just to the bottom of the plate/baffle. Hope this helps.
Bernard
General dimensions for S2600 are (HxWXD) 984x559x406mm.
Your work is very impressive for a young (or old) man. You are doing such a beautiful job, it is a shame you are not building a Pair. Perhaps you will do a second one later,
Mrbluster
but ... i need anybody who give me the exact dimensions on the pic with the red lines
greetings
have nobody the s2600 ?