1 Attachment(s)
Wow, Look at this response
I did not expect this:eek:
Red is ME150HS in 4343 Cabinet with original X-Over
Blue is 2235H/2231A in 4343 Cabinet with original X-Over
Re: Wow, Look at this response
"I did not expect this"
What enclosure size and tuning frequency are you using?
5.6 cubic feet and two 4.125" ID ports x 8.25" ducts for an Fb of ~ 32 Hz right?
What is the DCR of that stock LF inductor or do you have a stock one?
"Would there be any sense to try a ME150HS instead of 2235H?"
If you have them then try them :)
Re: Re: Wow, Look at this response
Quote:
Originally posted by Giskard
"I did not expect this"
What enclosure size and tuning frequency are you using?
5.6 cubic feet and two 4.125" ID ports x 8.25" ducts for an Fb of ~ 32 Hz right?
How you know?;) ;)
What is the DCR of that stock LF inductor or do you have a stock one?
I use the original 4343 network except the 2012 modification :blah: :blah:
"Would there be any sense to try a ME150HS instead of 2235H?"
If you have them then use them :)
I just fiddle around:p
I think they are hard to get.
Re: Re: Wow, Look at this response
Quote:
Originally posted by Giskard
What is the DCR of that stock LF inductor or do you have a stock one?
I can measure all DCRs of 4343 network as soon as I'm ready to take them out again.
I had them out for the 2012 mod. and bypassed the 2405 section right then and guess what...
I did not measure the DCR of the coils to help everyone here :banghead: :banghead:
ME150H motor/basket ID help...
What is the core of the ME150H?
I'm guessing it's the 2227 / 2242 motor...
I'm hoping it's the 2227 basket, as I have 3 2227H that need to be reconed
1audiohack once showed me a 15 in high-end JBL woofer that looked very similar, but I don't remember what it was...
I had just visited another LHS member and seeing his ME150H woofers, but I can't remember which was which.
I recall that one of the woofers had an odd vent space through the side of the frame between the spider mounting pad
and the magnet mounting flange that was unique to the other 15" frames with the huge spokes, a la 18" frame.
Can someone post relevant pictures identifying the ME150H to this thread, especially a side view showing the thickness
of the magnet top plate and the cast shspe of the basket?