4435 conversion to TAD2001
I finally finished the modification of the 4435 network for the use of a TAD2001 driver and must say it was worth the work.
Following I'll post the first real 2426 (Aquaplas coated) - TAD2001 comparison at our forum.
Finally I'll advice you how to modify the network.
Feel free to ask questions. It's not to hard to do though :)
2 Attachment(s)
Schematic - Voltage Drive
The schematic shows L-Pad values for my prefered adjustment:
2426AQPL from earlier setup
TAD2001 from actual listening sessions
Rpar needed to be changed due to higher impedance of TAD2001
Resonance circuit (40uH) no longer necessary
Compensation C changed a bit
Slight L-Pad adjustment
Thats all ;)
Voltage drives are with real impedance, thus a bit wavy.
Schematic is of course simplified as I use CC crossovers.