Would look pretty nice if you sprayed them to match the C40 cabinets and then grained the finish
Type: Posts; User: jbl4ever; Keyword(s):
Would look pretty nice if you sprayed them to match the C40 cabinets and then grained the finish
Hello, it looks like a alnico 2405 version. Not knowing if it has a original diaphragm or after market one. Maybe ask for a dcr reading with a picture. The driver has been repainted as can be seen in...
Help BR, another crossover that works would be pro version 3110 or consumer version LX 13. This is a 800 hz crossover and designed for use with the 2215/ LE15A. You might also find using it as a 2...
Forgot to mention early GS kit 11 had the 2235H with those components and they used a 200hz and 5K for the crossover points. That 8” had to get very beamy at that frequency
Good Sound kit #11 used a 2226 , 2118, 2404. Check out their 4 way JBL kit #14. 2242, 2206, 2418, 2404 as of 2021
The 130A woofer is one of JBL’s highest sensitivity 15” non SR drivers they made 101db/1 watt. It is a great woofer but do not expect the last octave out of them 20-40hz with any authority. With this...
Also others in the plan section. Tables showing you the port and cabinet cuft for F3. You can make your cabinet in your style that will fit the decor
Tom you did not mention your budget. If you are into the JBL legacy speakers you might what to check for some Ti250’s, L220/22’s or L150A’s. These are kind of narrow speaker versions and they get the...
Also while you have the back off take a light and look around the edge of the diaphragm for a small crack. This is what I found years ago with this same symptom on a 2420 about 1/8” long. Changed out...
Hello Marlowe, and welcome to LH. The LE 15A works better in a larger cabinet in the range of 6 cuft to 8. It is a old version woofer and really never gets down to the last octave without being down...
Grey frame is older. JBL started in the pro series in black around 1982
He will be surely missed and our condolences to his family and friends
Before Crown sold off most of it’s old inventory I bought up all the face panels for the 200’s and 400’s plus some other parts. There was grey and black ones I have 3 of each just have to find which...
They should have had Urei make amps for them or put in their 6260 amp section
Is the woofer with the cork gasket a alnico magnet assembly
I have broken many things through my life with audio. Early 80’s was into Mobile Fidelity albums and one of the new releases was The Power and the Majesty 004. One side was recorded with...
Still stop in from time to time
We have both pairs here 4341Â’s and 4343Â’s. The 4341Â’s were saved from a fiery death as just cabinets and crossovers. I had all the components to replace everything that was missing. Between the...
Barry have you checked into the BMS 4540 nd or the 2407
If you are using the 3133 crossover the Lpads could be dirty. At a low volume level turn the knobs back and forth a couple of times. If they do not move chances are they have been over powered and...
Hello Mazen, you are correct in your assumption. Green LF, White mid, Yellow high. Also the white wire with black trace will be wired to the positive post. Proper connection for phasing on that...
Being these are the 4343B version as the OP said the woofers are 2231H’s. They have a rating of 200 watts continuous program. Not 100 or 150. I found they work best with amplifiers in the 250-300...
I rebuilt a pair last year. I did not even have to remove the foilcal or Lpad assembly. It was rebuilt on the front of the baffle board. The wire leads are long enough. I would not change the...
Phil, take some white card stock and go around the gap and see if it comes out orange or brown. Then use some tape to clean out the gap
Hello TerrapinBill, the red and black wires go to the input binding posts. The Green and Green with Black trace to the woofer.