Jbl Diy K2/Array

[caladois]

Me too

[matsj]

In usa 300 usd each + customs+ freight.

mats

[Mr. Widget]

A company in the same town as i work in have made these horns. They used a 5 axled cnc.

Very cool... when we made the first one for Project May we tried to do it with a three axis CNC router... didn't work too well due to the required tool extension and physical limitations of the machine. With a 5 axis machine you could even machine them out of solid wood and produce some that are nice looking like JohnW's.

Keep us posted as the system comes together.


Widget

[matsj]

A little update:

I got the air coils for the eq filter from Denmark yesterday ( 28 pieces )and i bought 7 battery holders too for the 9 volts battery. I hope the capacitors and inductors also comes.

To mount the drivers on the horns i have also bought 28 special "nuts" with 6 mm thread inside and a wood thread outside.

In coming weekend i´m going to make some fill and painting on the horns.

mats

[matsj]

After some weeks with a lot of work on my job, i got some time this weekend to my speaker project. A friend of mine ( Patrik ) have helped me with the saw. I have maked the steel plates to mount the drivers on and painting the horns.
Tomorrow evening we will put the boxes together with glue and small wood pieces( i don´t know the english word for it, bickies ?), no screw.

For a month ago i bought some veener from an old man and he said i should take all of that he had in his storage, so i got 1000m2 veener for 300 usd . There is over 200m2 walnut veener to my speakers and he had 180 walnut batten to for 35 usd .

My 2435 hpl drivers are still in the us but i hope i´ll get them to christmas.

Some pictures:

[matsj]

More pics:

[hjames]

OutSTANDING! Matsj, please keep us informed - it looks like fabulous work!
(Wish it was closer so I could have listen when all is done ...!)

[4313B]

Really nice! Sometimes this place isn't so bad after all!

After some weeks with a lot of work on my job, i got some time this weekend to my speaker project.

Yep. I thought this coming week was going to taper off but... "Oh hell no!"

My 2435 hpl drivers are still in the us but i hope i´ll get them to christmas.

I missed this thread. :dont-know You should have directed me to it in August so I would have known what was up!

I assume Zilch got those LE14H-3's for you. That's pretty incredible actually, especially five of them. Very good!

[matsj]

Thanks hjames.

4313B: No problems i know you got much to do and i don´t want to stress you . Yes he helped me.

There is coming more pictures tomorrow night.

mats

[Valentin]

very impresive

more pictures

[Titanium Dome]

Nice work so far. Congratulations!

I was afraid the project had died, but now it's back to life!

[Jan Daugaard]

Hi Mats

It's wonderful to see that you are making progress.

It won't be long before I send you a SolidWorks drawing of the horn of which my avatar is a cross-section.

[richluvsound]

Mats,

nice work !

Rich

[timc]

Very nice!

[macaroonie]

Nice to have the tools aint it. Have you any pics of the cutter head at work ?