Adding 2405H to my custom JBL system

[Beowulf57]

I'm in the process of adding 2405Hs to my system (pic below) and would appreciate comments on the decisions to be made.

I have Brociner-modified back-loaded folded corner horns (not identical: left has a D131 and right has a D130), LE85 compression drivers with HL91 horns and lenses; crossover is the LX5. Given the slightly lower sensitivity of the D131, the LX5 HF crossover level is set Low for the left channel and Mid for the right. This gives a fairly well matched balance between the two channels and the separate tube-regulated monoblock tube amps are adjusted to match channel levels.

I'll be using 3106 crossovers for the 2405s and plan to cascade the LX5 and the 3106.

At this point, my thought is to mount the 2405s in Minimus 7W (walnut) cases and locate the box horizontally on top of the LE85/HL91 enclosures which will provide a nice finished look and allow a bit of positional tweaking with respect to time delay between the LE85s and the 2405s.

Thoughts, suggestions?

Thanks,

Beowulf57