Hello I'm in the process of insulating my garage so the neighbors cant here the tunes its a steel building and it gets loud outside. does anybody know what insulation would work better to keep the music inside.me and my buds have pool night every Friday.
Steel buildings usually have rolls of fiberglass insulation with a plastic face, as opposed to kraft paper face batts used in homes.
No matter what insulation you use, looks like you'll have a lot of stuff to move first.
Nice game room.
Living in the Land of the Sun
You might want to grab a copy of A. Everest's book "Building a studio on a budget". (www.partsexpress.com) What it all boils down too is MASS and making things air tight. High Mass is your friend.
Cyclotronguy
Hi,
- "Roxul" makes a few grades of mineral wool that has both fire retardent & sound insulating qualities . The thicker / the better .
- Apart from that , a bit of fact-finding is in order to get ones expectations in line with the $$ of expenditures vs the results .
- ie; Fully stopping sound transmisson is no small feat ( when it comes to bass frequencies ) .
- One needs to study the graphs to understand the relationship between a materials' thickness ( &/or density ) to reducing LF transmission through absorbtion methods .
- Here's a direct link to P-E(s)' sale page for :
I don't have the (above) book , so I can't comment on it much except to say that the author is a leading authority on the subject of acoustics .
I have this ( A. Everests' ) tome ( 615 pages ) on acoustics called ;
- It's likely way more info than the op wants or actually needs .
>< cheers
What he said!Originally Posted by Earl K
Also, the recycled cotton denim insulation is also better than fiberglass.
As Cyclotron guy said... MASS. Fiberglass has very little. It will help, but cotton or the Roxul products will do better.
Widget
What about the spray on foam insulation? I've seen several steel buildings with the walls so insulated. Can probably be layered on as thick as wanted/required. Probably easiest to apply.
[quote=Earl K;268155]Hi,
- One needs to study the graphs to understand the relationship between a materials' thickness ( &/or density ) to reducing LF transmission through absorbtion methods .
[Quote -/]
-----------------------------------------------------------------------
An excellent example of Earl K's requirements: __ For the RCA Prniceton Laboratories Anechoic Chamber, in the early 1930's__ Dr. Harry Olson chose the only suitable sound absorbant of that time__ an elegant "rug padding materiaL, trade-marked as "OZITE" with a very high "NRC", Noise Reduction Coeficient, provided from a "wool and cow's hair" composite, a very clean, long-life material.
All six surfaces of Dr, Olson's Anechoic Chamber were eight feet in thickness, The chamber was equipped with a steel grating suspended work foor. In all cases, Ozite sheeting was suspended verticaly by its the top edge along its full length away from each wall and down from the ceiling. In the chamber bottom, substantially below the steel work floor, the Ozite sheeting was suspended from the steel work floor.
On all six chamber surfaces, All Ozite sheets were spaced approxamately one & one half inches apart with alternating sheet lengths of five feet and eight Feet awayfrom the chamber surfaces.
-----------------------------------------------------------------------
Cheers, herki the cat
Last edited by herki the cat; 11-13-2009 at 09:10 AM. Reason: Touch ups
Clear everything out of that cluttered garage and spray with cellulose. Will give you better climate insulation and sound deadening.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
