Interesting for in style of 4367 But I guess the 4367-Wg never will be possible to buy.
http://reconingspeakers.com/product/...-320-0045-002/
I stick to my DIY M2 personally
/Karl
Interesting for in style of 4367 But I guess the 4367-Wg never will be possible to buy.
http://reconingspeakers.com/product/...-320-0045-002/
I stick to my DIY M2 personally
/Karl
I would be curious to see the T/S parameters of this -1 version, or better still a full-blown EDS !
Bummer that part number does not show up on the pro side of JBL parts.
Barry.
If we knew what the hell we were doing, we wouldn't call it research would we.
Hi Ivica
Unfortunately I have not
I visited my friend and we did measure 2216nd-1. I am posting results.
T/S data measured from the first driver:
Re = 5.556Ohm
Fs = 28.26Hz
Qts = 0.376
Qes = 0.397
Qms = 7.12
Le = 0.461mH
Mms=134.1gr
Vas = 332.8liters
T/S data measured from the second driver:
Re = 5.52Ohm
Fs = 27.59Hz
Qts = 0.3572
Qes = 0.3776
Qms = 6.589
Le = 0.4703mH
Mms=123.8gr
Vas = 378.4liters
I am not sure how much my data is different from factory specs since they are not available.
Driver with lower fs was working around 2 hours in free air (20Hz , 3V applied). I suppose this influenced measured data. The second one was "cold".
because MMS is calculated from the impedance sweep, deviations in measurement could influence the calculation. Big difference but may not reflect a real difference of ~10g.
Thank you zeljkor!
Interesting, this thing seems to behave similar to a 2245H
There are currently 1 users browsing this thread. (0 members and 1 guests)