How do you tell the difference? Is it as obvious as the model number being different? The reason I ask is that I opened up the L19s (as marked on the front label) I purchased Friday and they have 116H woofers in them. Shouldn't they be 116As?
How do you tell the difference? Is it as obvious as the model number being different? The reason I ask is that I opened up the L19s (as marked on the front label) I purchased Friday and they have 116H woofers in them. Shouldn't they be 116As?
Check the serial numbers. I have heard that if they have the A following the number, that would indicate the model change. Likely, they couldn't just throw away the foilcals that they already ordered but didn't use if there was a design change.
Hope that helps.
Regads,
Bart
'Good idea - JBL does this with the 4315/4315A, where the nameplates for both just say 4315. They did change the nameplates for the 4315B, though...Originally Posted by mech986
John
Bart, they do indeed have an "A" following the numbers. Didn't even see that in the dimness of my garage. So I'd gather they are indeed L19As.Originally Posted by mech986
Thank you for that insight.
You're very welcome. BTW, I don't usually spell "regards" as "regads", maybe a little Boston accent coming through!Originally Posted by soundmotor
Bart
The difference between them is
The L19 has a 116A which is Alnico
The L19A has a 116H which is ferrite. The tweeter and cross over was the same on both.
Regards
Michael
There are currently 1 users browsing this thread. (0 members and 1 guests)