Results 1 to 9 of 9

Thread: Help wanted regarding 2235H

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    pangea
    Guest

    Help wanted regarding 2235H

    Hi everyone!

    I'm about to buy a pair of 2235H, which the seller say, are about 6 - 7 year old, in mint condition and only sparingly used, after the first year or so and then have been laying in storage the last couple of years.

    What kind of serial numbers should be expected, if this is true?

    Anyone who could give me a rough estimate and perhaps also tell me what year they were first manufactured?

    BR
    Roland

  2. #2
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,219
    Watch the suspension/spider for sag depending on how they were stored.

    Rob

  3. #3
    Alex Lancaster
    Guest
    I think they came out in 1981.

  4. #4
    Senior Member frank23's Avatar
    Join Date
    May 2005
    Location
    The Netherlands
    Posts
    356
    right,

    I bought a pair a few years ago and they had to be reconed. At first they looked ok, but when I connected them and fed them some signal the foam edge had gone in 5 minutes

    look out for the sag, if they were stored on their fronts or back, the spider won't be flat / level anymore because the weight of the cone, this would make them a definate recone I'd say because the coil won't be centered [before / aft] in the magnetic field anymore

    they should have been stored upright, the way they are normally mounted

  5. #5
    pentictonklaus
    Guest

    2235

    The only way to try them is listening if you can't see any damage. If anything goes after playing hard, well they are no good and need repair. I do turn mine around once in a while on my 4435's. I had my speakers often stored away for years when I was still working around the globe. Many did well after years of non proper storage. Do not panik, just try... Every 2235 is worth repairing.

  6. #6
    pentictonklaus
    Guest

    2235 or 2234

    I should have sad 2234. 2235 without the mass ring of course.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2231A or 2235H in 4333B
    By Peter Becker in forum Lansing Product Technical Help
    Replies: 22
    Last Post: 04-07-2005, 06:23 AM
  2. 2231A to 2235H ???
    By John in forum Lansing Product Technical Help
    Replies: 13
    Last Post: 02-15-2005, 03:19 PM
  3. 4343 cabinet plans wanted.
    By Steve in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 11-23-2003, 02:25 PM
  4. 2234H, 2235H, and Mass Controlling Rings
    By 4313B in forum Lansing Product Technical Help
    Replies: 11
    Last Post: 07-04-2003, 10:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •