yggdrasil! Im impressed
Very nice home made milling machine for the routing process. I can see that you could make any sizes of horn mouth in this jig.
Do you have any "blue prints" of it ? If yes, could you send me a PM ?
Regards
yggdrasil! Im impressed
Very nice home made milling machine for the routing process. I can see that you could make any sizes of horn mouth in this jig.
Do you have any "blue prints" of it ? If yes, could you send me a PM ?
Regards
Flodstroem
The project have been finished a couple of months now. Things really do take time.....
Here's a couple of pictures a while back. The 2405's have gotten their own stands and both the stands and the mid-horns have the same finish as the main cabinets.
I have attached the frequency response of the mid - hf section. It is an average of ~50 samples, no other smoothing.
Johnny Haugen Sørgård
I designed the crossover with 24dB slopes on both the 2425 and 2405 while giving the 2235 12dB slopes.
I added zobels on all drivers.
The l-pads are built with resistors (other values than in the drawing), and are chosen by measuring and listening.
Johnny Haugen Sørgård
The horn has Tractrix profile. The profile and overview of parts drawings are attached.
Johnny Haugen Sørgård
I'll keep watching as I too love horns for audio!
Regards, Ron
JBL Pro for home use!
What are the crossover points of your system?
Hey those look nice!
Rob
"I could be arguing in my spare time"
There are currently 1 users browsing this thread. (0 members and 1 guests)