Cabs Recommendation for LE14

[ngccglp]

Hi,

I am thinking of starting a project based around the LE14. Anybody has a cabinet plan that I could used? I tried to look up the plans in the libarary but couldn't find any. Thanks.

[4313B]

1.8 to 4.0 cubic feet tuned to 28 Hz to 30 Hz.

[ngccglp]

Hi Giskard,

Could you also kindly advise on the port size and length? Actually, is there a baffle design that only has an opening (sort of like the Altec A7) but w/o any duct? It would be much easier to fabricate.

Thanks.

[Robh3606]

Hello ngccglp

You need the internal volume to calculate port size depending on the box tuning. You can get a free box program here WinIsd

http://www.linearteam.dk/default.aspx?pageid=winisd

Or use the clasic boxes JBL used from the plans section:

http://www.lansingheritage.org/html/.../jbl-plans.htm


Rob

[Hamilton]

I just built a pair on Zilch's recommendation using the L200t3 layout, but brought the internal specs down to 3.5 cu. ft, (2) 3" ports 8 ½" long for LE14As.

http://manuals.harman.com/JBL/HOM/Te...200t3%20ts.pdf

[ngccglp]

Thanks. Will give the software a go asap.

Hamilton, nice cabs.

[4313B]

I just built a pair on Zilch's recommendation using the L200t3 layout, but brought the internal specs down to 3.5 cu. ft, (2) 3" ports 8 ½" long for LE14As.

http://manuals.harman.com/JBL/HOM/Te...200t3%20ts.pdf

http://audioheritage.org/vbulletin/s...&postcount=295

http://audioheritage.org/vbulletin/s...&postcount=307

http://audioheritage.org/vbulletin/s...&postcount=308