I have just completed building two set of clone JBL 4430s in custom oak cabinet and I am starting to collect JBL components for next winter's speaker project.

I have a pair of freshly reconed JBL 2235Hs, a pair of 2420s with original JBL aluminum diaphrams and a pair of 2307 horns. I am currently missing the 2308 plastic difraction grates for the 2307s.

I am planning on building clone L200s or L300s in custom oak cabinets so my wife will let them in the house. (According to my wife there is nothing on earth as ugly and unnecessary as a factory set of large JBLs.)

I will be building the final versions of the L200 or L300 crossovers which crossover at 800 Hz between the 2235H and 2421.

The 2307 / 2308 combination will remain relatively flat to somewhere between 500 and 800 Hz depending upon what JBL literature you read and is used in the L200 / L300 systems. I am currently missing the 2308 diffraction lenses and I have read some negative comments regarding this combination on the form.

I used 2344As in my 4430 clones and they will only remain relatively flate to 1K Hz so they would not be the optimum choice. I would also like a bit different sound than the 4430s.

The 2370A will remain relatively flat to about 630 Hz but my listening position is only about 10 to 15 feet from the speakers and I am concerned that the dispersion of the high frequencies will not be sufficient.

Does anyone have any suggestions for horns that I can use with the 2420s?