I need some help on the modification that would need to be done to a 4345 CC filter to accomodate a 8 ohms compression driver instead of a 16 ohms one.
Name: filtre clone 4345 couplage de charge.jpg Views: 3284 Size: 59.8 KB

There is an 8 ohms lpad so I guess impedance modification would not impact the filter behavior, right?
Would removing the parallel 20 ohms resistor be a step in the right direction? (20 ohms // 16 ohms is 8.8 ohms)

There is always the possibility of adding an autoformer in front of the compression driver to multiply its impedance, but...

Any help would be greatly appreciated