Here are my newly restored pairs of L222's& L220's. I have done something special to these speakers; I replaced the LE5-9's with the Summit's LE85/H92 combination. As you might be able to see on the Disco's rear section, there is a black box sticking out of the back that allows the X-over to retain a somewhat normal position as it resides on that panel. I also have replaced the LE14-H with the LE14-H1 for now. I still have the original LE14-H's. The improvement is DRAMATIC!. It is amazing just how easy this modification is. I do not claim it is perfect but it is worth the compromise. For the L220's I did the same thing but used an obsolutely beautiful 2420/2312 16ohm combo and that leads me to my question. How do I adjust the crossover component values to compensate for the 16 ohm driver? If anyone would like to see a sort of pictorial "how to", please email me at [email protected]. Thank you. And I want to personally thank Zilch for helping me get the site's controls figured out, Thank you Sir!