My JBL 4355 build

[ivica]

Come on boys!
.... Martin was faster but ....

"2235" stands for C8R2235 (Original of course). We do not make compromise here
"A" stands for Alnico core, thus the need for re-magnetize. In this case its a K140 core.

And
No, the K140 is -unlike the E140- not to strong for the C8R2235 kit. It is a substitute for the 2235 core and shows exactly 1,20T after re-magnetized.

Yes, the 2 unfinished woofers lying around here and waiting for me to FINALLY get them done.

Hi Guido,

Now everything is clear, so it is K140 'basket' with C8r2235 recone kit used. Are You planning to use mass-ring or not.
Anyhow , due to AlNiCo magnet applied, power 'overload' has to be prevented.

regards
ivica

[Guido]

Are You planning to use mass-ring or not.ivica

As Ralf is building a 4355 we need 2235 woofers and so we use the massring.

[berga12]

Hi hb, i copy paste your driver support thanks for inspiring me with your build.

you painted the outside in silver?

[.:hb:.]

Those Kallax Shelves are indeed tilted intenionally . But there's a little mistake there - it would have been better to tilt them the other way around.
Side and top walls of the 4355 are treated with a light grey wax.

[pos]

But there's a little mistake there - it would have been better to tilt them the other way around.

Would it be to make the discs and books stand on the left side?

[.:hb:.]

Yes. When a vinyl record sleeve stands upright, the cover side is on the right. If those shelves would be tilted to the left, the records wold be too, and the cover side would be the one to look at.
Missed that one prior to the assembly .