Despite the fact that I've had JBLs since '73, I'm still small potatoes.
3 L55s
7 L212
2 B212
2 sub1500
1 PB12
But the next purchase will be Performance Series.
Despite the fact that I've had JBLs since '73, I'm still small potatoes.
3 L55s
7 L212
2 B212
2 sub1500
1 PB12
But the next purchase will be Performance Series.
(3) 4412's front and center channels
(2) 4410's rear channels
(2) 2245H in 10cf enclosures
(2) 6260 power amps
(2) 6230 " " need 3 more
R Beardsley (BEAR)
1 pair L220's with B460/BX63; Living room system
1 pair 4313B's with PB12 Sub; Florida room system
1 pair 4401's with PB10 Sub; Office system
Alas, bedroom system speakers non-JBL (Phase Tech PC80's)
Considering at some point a DIY project for this system. Maybe.
Peter
My small collection:
L110
Control 5
M5
L8400P sub
TL 900 auto speakers
Originally Posted by mtnmac
Hey mtnmac, glad to see another L110 owner!
Larry
Here too.
John
My little collection (which takes enough space)
L19
Century Gold
4430
DBX223XL
5235
M552
Naim Amps
Consumer series:
(2) C45 Metregons (S82 and 201 systems)
C46 Minigon (S5)
C38 Baron (D131, DLH175 and N1200)
Bel Aires (D216, 075 and N2600)
Lancer 99's (LE14A, LE20-1)
(1) D33001
Pro Series:
4343's
4430's
4301BE's
SR series - 4738, 4732, 4725, 4722, 4718 and 4704 (all pairs)
(2) Cabaret 4602 stage monitors (E120, 2402)
(2) 4726A Power Series (2206, 2426 and JBL modified 2344) -- FOR SALE
(2) EON 15
(3) MR 805 stage monitors
(2) AS2218 (dual 18's loaded with 2242H's) --- FOR SALE
(3) 4638 (dual 15's loaded with 2035H's) --- NOS, FOR SALE
(6) Control 5
and sets of 4520 and 4560 clones.
Electronics:
(4) 5234, 5235 - cards include sets of 80, 250, 500, 800, 1200 and 7000hz
(1) 5234A (4343 cards)
(2) 6290 amplifiers
(1) SA600 amplifier
(1) MPA750 amplifier
(1) M553 crossover
(1) M712 gate limiter
(2) 6010 amplifiers
(1) 5306 mixer
(4) Music Mix 14 -- FOR SALE
Way too much stuff!!
You DOG!!!
Dude, you are LOADED with JBL!
It was a pair of Lancer 99's that got me into JBL many moons ago. I was about 15 or 16, and a friend's dad had a pair. I was using some Dynaco A-25's and AR-2AX's at the time, and I was ruined by the Lancers! It took me couple of years but I finally bought a pair of L100's, and the rest is history!
Peter
Peter:You DOG!!!
Dude, you are LOADED with JBL!
It was a pair of Lancer 99's that got me into JBL many moons ago. I was about 15 or 16, and a friend's dad had a pair. I was using some Dynaco A-25's and AR-2AX's at the time, and I was ruined by the Lancers! It took me couple of years but I finally bought a pair of L100's, and the rest is history!
Peter
You oughta see the list of what I've gotten rid of!
My first JBL's were L150A's, circa 1981.
I've only gotten rid of one pair: My L100's, in 1982 when I bought my L220's. And I still wish I hadn't let go of them. BUT...I was fortunate enough just recently to hook up with the fellow I sold the L100's to, and he sold me back the L100 stands that I let him have in '82, I made new front-to rear arms for them, 2-1/2" shorter, so they would look right to use them with my 4313B's. He sold me the stands back for $25!! Those classic stands have gone for a ton on eBay!
Peter
Any chance you could take measurements of the stand parts so a person could make a set? They don't look like rocket science to make and, you are right, originals cost a bundle.I've only gotten rid of one pair: My L100's, in 1982 when I bought my L220's. And I still wish I hadn't let go of them. BUT...I was fortunate enough just recently to hook up with the fellow I sold the L100's to, and he sold me back the L100 stands that I let him have in '82, I made new front-to rear arms for them, 2-1/2" shorter, so they would look right to use them with my 4313B's. He sold me the stands back for $25!! Those classic stands have gone for a ton on eBay!
Peter
See this thread for enough dimensions to get you started:
http://audioheritage.org/vbulletin/s...7&page=1&pp=15
There are those who say there are higher stands that work better, but I have found that these do improve the imaging of my 4313B's. It's the upward angle that does it. I found some minor discrepancies in the dimensions shown here vs. the actual stands I have, but pretty close. Also, the notch depth is missing from this illustration, the depth is 1" in all cases. Let me know if you have any questions. Good luck!
Peter
P.S. The thread shows the arms as being 2-1/16"wide. My stand's arms measure an even 2".
I like to build systems up from drivers but I have a good collection of stock speakers I use as references and in smaller systems around the house
L-25 Primas my first real speaker and first JBL's
L100's actually L88 Plus with M-12 Expander Kits
L80T3
L20T3
L3
4655
These are systems I built as clones
XPL-200A
4434
Urei 811C
Main system drivers
E-145
2123
2416/2344 horns
Electronics
M552
M553
5235
Urie 539 EQ
Have a collection of drivers for future projects and am always looking for something I don't have to try out.
Rob
Hi everybody.
When I was in High School I had a pair of L-26 that I loved. I sold them to a friend 5 years ago. I now have:
1 Pair of Lancer 44 (LE8T reconed) passive radiator not reconed.
1. Pair S7 in Olympus C50 cabinets
That old time 1960's JBL sound, I love it!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote