Any progress yet?
-Tim
Any progress yet?
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
Thanks John,
In that case, I've just forgotten TAD 4003
Rich
I think we should put an order in for 26 of them, and 26 1500AL's too.
Stop it..its getting painful.
I mean like +- 1 db...I don't think I could afford a mic that flat!
Ian
That is really nice looking.
Is that anechoic response, or your in-room respons?
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
Is there an EDS available for the 476Be?
I did a bunch of measurements of the 435Be and 476Be on the PT-F95HF, H4338 and H9800 horns over the course of a weekend to get the data for LEAP. I used JBL's method of shooting straight up into the sky with the mic suspended 1m overhead.Not when I last checked a few years ago.
.
The last two graphs have the 2441 and 2311/2308 added just for fun.
the 476Be looks really smooth on the wave guide! And this really is without any EQ?
Impressive!
Did you give it a listen in your dual 1200FE speaker?
Could that smooth curve indicate that the 476Be sound better on that wave guide than it does on the H9800/H4338 (with proper EQ for both, and only above 1200Hz or so, for comparison) ?
4313B, do you have distortion measurements for all these combinations?
Maybe in a couple months I'll have time to do that.
The smooth curve looks quite interesting. It's a very nice driver.No, I didn't have time for that. I just needed some data for LEAP. I have more measurements to take in the future depending on how the projects go.
There are currently 1 users browsing this thread. (0 members and 1 guests)